Technical specification of Estimote Beacons and Stickers


#1

Below you’ll find technical specification for Estimote Proximity Beacons, Location Beacons, Location Beacons with UWB and Stickers. If you encounter problems with customs clearance and need to provide more in-depth documentation, please contact our Community Team.

Proximity Beacons

Identification (Hardware revision)

  • G1.8, G1.10, G1.12

MCU

  • Bluetooth® SoC
  • ARM® Cortex®-M4 32-bit processor with FPU
  • 64 MHz Core speed
  • 512 kB Flash memory
  • 64 kB RAM memory

Radio: 2.4 GHz transceiver

  • Bluetooth® 4.2 LE standard
  • Range: up to 70 meters (230 feet)
  • Output Power: -20 to +4 dBm in 4 dB steps, “Whisper mode” -40 dBm
  • Sensitivity: -96 dBm
  • Frequency range: 2400 MHz to 2483.5 MHz
  • No. of channels: 40
  • Adjacent channel separation: 2 MHz
  • Modulation: GFSK (FHSS)
  • Antenna: PCB Meander, Monopole
  • Antenna Gain: 0 dBi
  • Over-the-air data rate: 1 Mbps (2 Mbps supported)

Sensors

  • Motion sensor (Ultra-low-power, high-performance, 3-axis “femto” accelerometer)
  • Temperature sensor

Additional features

  • NFC

Power Supply

  • 1 x CR2477 – 3.0V lithium primary cell battery (replaceable)

Environmental Specification

  • Operating Temperature: 0°C to 60°C (32°F to 140°F)
  • Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F)
  • Relative Humidity (operating): 20% to 80% relative humidity
  • Relative Humidity (storage): 10% to 90% relative humidity, non-condensing
  • Splash-proof

Materials

  • non-flammable
  • enclosure: silicone
  • adhesive layer: double-sided adhesive tape

Size and Weight

Length 55mm (2.16 inches)
Width: 38 mm (1.49 inches)
Height: 18 mm (0.71 inches)
Weight: 30g (1.06 ounces)

Location Beacons

Identification (Hardware revision)

  • F3.3

MCU

  • Bluetooth® SoC
  • ARM® Cortex®-M4 32-bit processor with FPU
  • 64 MHz Core speed
  • 512 kB Flash memory
  • 64 kB RAM memory

Radio: 2.4 GHz transceiver

  • Bluetooth® 4.2 LE standard
  • Range: up to 200 meters (650 feet)
  • Output Power: -20 to +4 dBm in 4 dB steps, “Whisper mode” -40 dBm, “Long range mode” +10 dBm
  • Sensitivity: -96 dBm
  • Frequency range: 2400 MHz to 2483.5 MHz
  • No. of channels: 40
  • Adjacent channel separation: 2 MHz
  • Modulation: GFSK (FHSS)
  • Antenna: PCB Meander, Monopole
  • Antenna Gain: 0 dBi
  • Over-the-air data rate: 1 Mbps (2 Mbps supported)

Sensors

  • Motion sensor (3-axis)
  • Temperature sensor
  • Ambient Light sensor
  • Magnetometer (3-axis)
  • Pressure sensor
  • EEPROM Memory 1 Mb
  • RTC clock

Additional features

  • GPIO
  • NFC

Power Supply

  • 4 x CR2477 – 3.0V lithium primary cell battery (replaceable)
  • High efficient Step-Down DC-DC converter

Environmental Specification

  • Operating Temperature: 0°C to 60°C (32°F to 140°F)
  • Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F)
  • Relative Humidity (operating): 20% to 80% relative humidity
  • Relative Humidity (storage): 10% to 90% relative humidity, non-condensing
  • Splash-proof

Materials

  • non-flammable
  • enclosure: silicone
  • adhesive layer: double-sided adhesive tape

Size and Weight

  • Length: 62.7 mm (2.47 inches)
  • Width: 41.2 mm (1.62 inches)
  • Height: 23.6 mm (0.93 inches)
  • Weight: 67g (2.36 ounces)

Location Beacons with UWB

  • I1.2

MCU

  • Bluetooth® SoC
  • ARM® Cortex®-M4 32-bit processor with FPU
  • 64 MHz Core speed
  • 512 kB Flash memory
  • 64 kB RAM memory

Radio: 2.4 GHz transceiver

  • Bluetooth® 4.2 LE standard
  • Range: up to 200 meters (650 feet)
  • Output Power: -20 to +4 dBm in 4 dB steps, “Whisper mode” -40 dBm, “Long range mode” +10 dBm
  • Sensitivity: -96 dBm
  • Frequency range: 2400 MHz to 2483.5 MHz
  • No. of channels: 40
  • Adjacent channel separation: 2 MHz
  • Modulation: GFSK (FHSS)
  • Antenna: PCB Meander, Monopole
  • Antenna Gain: 0 dBi
  • Over-the-air data rate: 1 Mbps (2 Mbps supported)
  • Ultra Wideband (UWB)
  • IEEE802.15.4-2011 UWB compliant
  • Precision real time location systems (RTLS) using two-way ranging
  • Ranging accuracy (using two-ranging scheme)up to 25cm
  • Usable ranging distance indoors- up to 30m (in real world conditions between 2 UWB beacons)
  • Support for 6 RF bands from 3.5 GHz to ^.5 GHz

Sensors

  • Motion sensor: ultra-low-power, high-performance, 3-axis “femto” accelerometer
  • Temperature sensor
  • Ambient Light sensor
  • Pressure sensor
  • EEPROM Memory 1 Mb
  • RTC clock

Additional features

  • GPIO
  • NFC

Power Supply

  • 3 x CR123A – 3.0V lithium primary cell battery (replaceable)
  • High efficient Step-Down DC-DC converter

Environmental Specification

  • Operating Temperature: 0°C to 60°C (32°F to 140°F)
  • Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F)
  • Relative Humidity (operating): 20% to 80% relative humidity
  • Relative Humidity (storage): 10% to 90% relative humidity, non-condensing
  • Splash-proof

Materials

  • non-flammable
  • enclosure: silicone
  • adhesive layer: double-sided adhesive tape

Size and Weight

  • Length: 75.25 mm (2.96 inches)
  • Width: 49.63 mm (1.95 inches)
  • Height: 27.1 mm (1 inche)
  • Weight: 98g (3.45 ounces)

Stickers

Identification (model number)

  • SB0

MCU

  • Bluetooth® SoC
  • ARM® Cortex®-M0 32-bit processor
  • 16 MHz Core speed
  • 256 kB Flash memory
  • 16 kB RAM memory

Radio: 2.4 GHz transceiver

  • Bluetooth® 4.2 LE standard
  • Range: up to 15 meters (50 feet)
  • Output Power: -20 to +4 dBm in 4 dB steps, “Whisper mode” -30 dBm
  • Sensitivity: -93 dBm
  • Frequency range: 2400 MHz to 2483.5 MHz
  • No. of channels: 40
  • Adjacent channel separation: 2 MHz
  • Modulation: GFSK (FHSS)
  • Antenna: Omnidirectional chip antenna
  • Antenna Gain: 0 dBi
  • Over-the-air data rate: 1 Mbps (2 Mbps supported)

Sensors

  • Motion sensor (Ultra-low-power, high-performance, 3-axis “femto” accelerometer)
  • Temperature

Power Supply

  • 1 x CR2020 – 3.0V lithium primary cell battery (not replaceable)

Environmental Specification

  • Operating Temperature: 0°C to 60°C (32°F to 140°F)
  • Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F)
  • Relative Humidity (operating): 20% to 80% relative humidity
  • Relative Humidity (storage): 10% to 90% relative humidity, non-condensing

Materials

  • non-flammable
  • enclosure: polyurethane
  • with an intrinsic adhesive layer

Size and Weight

  • Variable

Newbie's Guide to the Estimote Galaxy